I have been procrastinating posting in the this website. Many new on FB, but in short, I have manufactured 10 boards with SeeedStudio Fusion and (for the moment)...

(the regular MiNT bar without the dongle of course)

(external flash Canon EZ300, with Solenoid#2 engaged)

(external flash WITHOUT solenoid#2 engaged, full f.8 aperture, no distance compensation)

Testing...

I have a new board and camera prototype #2. This is my pre-production board since I intent to do a mini manufacturing run at SeeedFusion PCBA. This new...

I have been working both on the hardware (will post later) and on the software. In the video I test the “functions” of the openSX70 camera. Please bear...

The new black 5.2 “Len’s and Bellows” boards here from Seeed Fusion!!! I also ordered a new UglyDongle board with the 2.8V regulator needed to run the arduino...

I have build the first openSX70 prototype. Even though I had tested the flash something (I don’t know if it’s a design flaw) is not working.

I connected...

This is my video. You judge. When I set a delay of 66mns on the arduino, is aproximately the minimum speed for which the SX70 goes full open...

I have finally built what I think is a working camera. In the video you can see the programming/debugging flat cable and the dongle. I also have a...